2-Pack Tapered Kayak Scupper Plugs

from $12.99

Sold in packs of two, these plug have a slight taper for a tight fit when installed. This is better than universal plugs with an extreme taper because those plugs tend to not hold as secure which makes them prone to leaking and becoming dislodged easily.

Plugs are easily removed using thanks to a pull cord loop.

Made in the USA

When measuring…

  1. Be sure to check each scupper hole to be plugged. They can and do vary from hole to hole.

  2. Measure to the nearest 1/8” at the section of the scupper hole where it is completely round and begins from a straight cylinder wall. You can download our Scupper Hole Size Gauge free of charge to help with the measurements.

  3. Select a plug size that has your scupper hole measurement somewhere near the middle of the taper range. For example if your scupper hole is 1-1/4”, you would want to select our 1-3/16” - 1-7/16”. This means that when the plug is installed, it will be approximately halfway in. If a larger plug is selected it will sit too high and be easy to be knocked out. If a smaller plug is selected it may sit lower but it may also not be large enough to press tightly in the scupper hole for a proper seal.

Size:

Sold in packs of two, these plug have a slight taper for a tight fit when installed. This is better than universal plugs with an extreme taper because those plugs tend to not hold as secure which makes them prone to leaking and becoming dislodged easily.

Plugs are easily removed using thanks to a pull cord loop.

Made in the USA

When measuring…

  1. Be sure to check each scupper hole to be plugged. They can and do vary from hole to hole.

  2. Measure to the nearest 1/8” at the section of the scupper hole where it is completely round and begins from a straight cylinder wall. You can download our Scupper Hole Size Gauge free of charge to help with the measurements.

  3. Select a plug size that has your scupper hole measurement somewhere near the middle of the taper range. For example if your scupper hole is 1-1/4”, you would want to select our 1-3/16” - 1-7/16”. This means that when the plug is installed, it will be approximately halfway in. If a larger plug is selected it will sit too high and be easy to be knocked out. If a smaller plug is selected it may sit lower but it may also not be large enough to press tightly in the scupper hole for a proper seal.

Why buy more than you need. Our universal rubber kayak scupper plugs come in 16 sizes and are available in pairs.

  • 5/8" to 15/16" (~16mm to 24mm) Two Kayak Scupper Plugs

  • 13/16" to 1" (~21mm to 25mm) Two Kayak Scupper Plugs

  • 29/32" to 1-1/16" (~23mm to 27mm) Two Kayak Scupper Plugs

  • 63/64" to 1-3/64" (~25mm to 30mm) Two Kayak Scupper Plugs

  • 1-1/32" to 1-1/4" (~26mm to 32mm) Two Kayak Scupper Plugs

  • 1-7/64" to 1-19/64" (~28mm to 33mm) Two Kayak Scupper Plugs

  • 1-3/16" to 1-7/16" (~30mm to 37mm) Two Kayak Scupper Plugs

  • 1-17/64" to 1-31/64" (~32mm to 38mm) Two Kayak Scupper Plugs

  • 1-23/64" - 1-9/16" (~35mm to 40mm) Two Kayak Scupper Plugs

  • 1-13/32" to 1-11/16" (~36mm to 43mm) Two Kayak Scupper Plugs

  • 1-33/64" to 1-23/32" (~38mm to 44mm) Two Kayak Scupper Plugs

  • 1-1/2" to 1-13/16" (~38mm to 46mm) Two Kayak Scupper Plugs

  • 1-21/32" to 1-31/32" (~42mm to 50mm) Two Kayak Scupper Plugs

  • 1-53/64" to 2-3/32" (~48mm to 53mm) Two Kayak Scupper Plugs

  • 1-29/32" to 2-3/16" (~48mm to 56mm) Two Kayak Scupper Plugs

  • 2-1/64" to 2-13/32 (~51mm to 61mm) Two Kayak Scupper Plugs

Ratings